DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

PCV valve

Thread Tools
 
Search this Thread
 
Old Mar 6, 2008 | 06:43 PM
Share
  #11  
MikeHTally's Avatar
MikeHTally
Champion
Joined: Aug 2007
Posts: 4,702
Likes: 2
From: N. Florida
Default RE: PCV valve
It's on the oil filler tube, which is usually on the driver's side of the engine, near the brake booster. Twist to unlock, plug the new one in an re-install. Cheap an' easy.
 
Reply
0
Old Mar 6, 2008 | 07:53 PM
Share
  #12  
damram1980's Avatar
damram1980
Professional
Joined: Mar 2008
Posts: 229
Likes: 0
From:
Default RE: PCV valve
i say clean it as well money might be better spent on k&n air filter, these trucks luv 2 breath

[IMG]local://upfiles/85470/AB6CE3B537C74258A5E1F7F3563B804B.jpg[/IMG]
 
Reply
0
Old Mar 6, 2008 | 08:26 PM
Share
  #13  
MikeHTally's Avatar
MikeHTally
Champion
Joined: Aug 2007
Posts: 4,702
Likes: 2
From: N. Florida
Default RE: PCV valve
It's only a few bucks -- our Hemi's PCVs are almost $30, but the "garden variety" only costs about $8. Go ahead and change it.
 
Reply
0
Old Mar 7, 2008 | 09:53 AM
Share
  #14  
cmattdabrat's Avatar
cmattdabrat
Joined: Mar 2008
Posts: 3
Likes: 0
Default RE: PCV valve
Thanks MikeHTally! I see it and you're right, they're very inexpensive, $5, and just a straight forward plug-in design.

I was looking for the bigger double bowl looking pcv valve.

Thanks again,
Matt
 
Reply
0
Old Mar 7, 2008 | 03:25 PM
Share
  #15  
cmattdabrat's Avatar
cmattdabrat
Joined: Mar 2008
Posts: 3
Likes: 0
Default RE: PCV valve
Is there a small amount of oil that should come out of this thing, the PCV Valve when you replace it?
 
Reply
0
Back to Subforum
3rd Gen Ram Tech
View Next Unread
KISSING TRUCKS




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 11:18 AM.