3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Bull bar install question

Thread Tools
 
Search this Thread
 
  #31  
Old 02-23-2008 | 08:41 PM
Redram05baby's Avatar
Redram05baby
Joined: Mar 2007
Posts: 1,468
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

You'll Need Some Form Of Connectors.. I Normally Use The Terminal Connectors With Heat Shrink Insulation. And In Some Kits The Actually Include Wire..

Just Need A Good Set of Wire Strippers and Crimpers.

 
  #32  
Old 02-23-2008 | 09:11 PM
RamItOne's Avatar
RamItOne
Thread Starter
Joined: Dec 2007
Posts: 4,393
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

that i got, my dogs somehow manage to find the outside cat 6 line running into the house (apparently they can hear a hum and they then dig) so it takes timewarner for ever to come out here and do a bury drop so i fix it in the mean time.

im just hesitant on the drilling into the cab, drilling into the panel part.

heres my magnetic light in use. you really ought to get one, it comes in handy




[IMG]local://upfiles/80693/CA81B177B4824395A5ABD92C83147925.jpg[/IMG]
 
  #33  
Old 02-23-2008 | 09:26 PM
Redram05baby's Avatar
Redram05baby
Joined: Mar 2007
Posts: 1,468
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

Not Exactly Sure What I Am Looking At In That Picture. Is That With The Bull Bar On? I Didn't See It.
 
  #34  
Old 02-23-2008 | 09:41 PM
RamItOne's Avatar
RamItOne
Thread Starter
Joined: Dec 2007
Posts: 4,393
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

its a pic of that magnetic light that ive got.
hint dont look at what its lighting, look at where the lights coming from.
 
  #35  
Old 02-23-2008 | 10:16 PM
Redram05baby's Avatar
Redram05baby
Joined: Mar 2007
Posts: 1,468
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

gotcha, That Is Pretty Nifty. You Gonna Do The Lights Tomorrow?

I Will Be Painting My Headlamps and Grill.
 
  #36  
Old 02-23-2008 | 10:28 PM
RamItOne's Avatar
RamItOne
Thread Starter
Joined: Dec 2007
Posts: 4,393
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

need to order them, called around today, one store can order it from their Dallas store, so earliest is tuesday.

Kc is getting rid of the 150 watts 380cp, they're keeping the lower wattage and for the high candle power they're going with hid. Hrm a grand for 2 lights. That's just nuts.
 
  #37  
Old 02-24-2008 | 01:00 PM
RamItOne's Avatar
RamItOne
Thread Starter
Joined: Dec 2007
Posts: 4,393
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

I was bored, heres what i was thinking about as far as extending the bracket...




[IMG]local://upfiles/80693/D3B53095E2DB4C7C9727A0754B2ABF67.jpg[/IMG]

[IMG]local://upfiles/80693/8F8639AEEDF045A8A0B41B0B390BC9C3.jpg[/IMG]

[IMG]local://upfiles/80693/57D963CCE9114B59B208256E2B66CA75.jpg[/IMG]

[IMG]local://upfiles/80693/8DAB3D87E5A84384A0E755FD4F7519CA.jpg[/IMG]
 
  #38  
Old 02-24-2008 | 01:03 PM
RamItOne's Avatar
RamItOne
Thread Starter
Joined: Dec 2007
Posts: 4,393
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

heres the clamp backwards, think i like the other way better, plus it gives it an extra half inch





[IMG]local://upfiles/80693/FFA8C1E94A7D4E22856B550AAC20B54F.jpg[/IMG]

[IMG]local://upfiles/80693/6D8F4C21A51743109651CD29E1522F36.jpg[/IMG]
 
  #39  
Old 02-24-2008 | 02:44 PM
Redram05baby's Avatar
Redram05baby
Joined: Mar 2007
Posts: 1,468
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

I DOnt Get Why You Have To Do That. It Looks Like It Will Fit A 5" Without A Problem

 
  #40  
Old 02-24-2008 | 03:05 PM
RamItOne's Avatar
RamItOne
Thread Starter
Joined: Dec 2007
Posts: 4,393
Likes: 0
From:
Default RE: Bull bar install question UPDATE HELP

just measured, a 6 inch just might fit.

[IMG]local://upfiles/80693/C2111BFF20D34EFFB827CD6A683001BE.jpg[/IMG]
 


Quick Reply: Bull bar install question



All times are GMT -4. The time now is 11:23 PM.