3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Throttle body programming?

Old Feb 21, 2008 | 07:13 AM
  #1  
Canadian Ram's Avatar
Canadian Ram
Thread Starter
|
Registered User
Joined: Jan 2008
Posts: 33
Likes: 0
From: Winnipeg Mb
Default Throttle body programming?

I have a 04 1500 QC 4x4 5.7l with 90000 miles.A while back it was starting to idle rough on start up and the ETC light would come on. I cleaned the throttle, replaced the EGR valve, all spark plugs and air filter. The rough idle went away for a few weeks, but now its back. It only does it right when the truck starts. I'm thinking of just putting a whole new throttle body on and seeing if that clears it up, but I'm not sure if i have to get the new throttle body "programmed" after I install it. Has anyone done this or can anyone shed some light?

Thanks
 
Reply
Old Feb 21, 2008 | 10:36 AM
  #2  
Canadian Ram's Avatar
Canadian Ram
Thread Starter
|
Registered User
Joined: Jan 2008
Posts: 33
Likes: 0
From: Winnipeg Mb
Default RE: Throttle body programming?

Bump. Anyone have any thoughts?
 
Reply
Old Feb 21, 2008 | 10:40 AM
  #3  
The Peddler's Avatar
The Peddler
Record Breaker
Joined: Sep 2007
Posts: 1,753
Likes: 0
From: BAMA
Default RE: Throttle body programming?

I don't know if you have to or not, I have never know of that being done.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:51 AM.