When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
if fuses are ok, make sure they are actually getting power? If not feed power to the output side of the fuse check your trailer connector a back if it works then repalce your intergrated power module. If it's and 05 or older, this is a big problem with these trucks.
This was great advise. I switched my fuse from one factory fuse to another and still had no power to running lights. Read this and stuffed foil into fuse area checked for power at foil location and had power. Went back to 7 and 4 pin harness and have power now in both harnesses. I guess now I just need to replace all of my 20a factory fuse in my 2014 Ram 3500.
I have 2017 Ram 1500 Laramie and the right trailer fuse keeps blown when 7 pin plug is plugged in. I used another 7pin plug with pigtails on it and it still blows the fuse when its not connected to trailer. Any ideas to solve problem as it blows fuse right away
I have 2017 Ram 1500 Laramie and the right trailer fuse keeps blown when 7 pin plug is plugged in. I used another 7pin plug with pigtails on it and it still blows the fuse when its not connected to trailer. Any ideas to solve problem as it blows fuse right away
Put a multimeter on it and probe the terminals to see if it's getting power. Then you can determine if it's a problem with the truck or a problem with the trailer. Just a quick YouTube search, this may help you out