3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rollin on New MEATS!

Thread Tools
 
Search this Thread
 
Old Apr 15, 2008 | 10:56 PM
  #31  
oefootball_70's Avatar
oefootball_70
Champion
Joined: Apr 2007
Posts: 4,829
Likes: 3
From: Olathe, KS
Default RE: Rollin on New MEATS!

I am gonna put them on to get my turning radius back
 
Reply
Old Apr 16, 2008 | 02:02 AM
  #32  
Rot Weiss Essen's Avatar
Rot Weiss Essen
Professional
Joined: Jan 2008
Posts: 103
Likes: 0
From:
Default RE: Rollin on New MEATS!

mmstar23, I would stay away from the add a leaf, I had a pair on my old truck and they were as noisy as hell and within 20 months one of them broke right in half. I will never go that route again. There are better ways for more lift in the rear IMO.
 
Reply
Old Apr 16, 2008 | 11:44 AM
  #33  
mmstar23's Avatar
mmstar23
Champion
Joined: Jan 2008
Posts: 2,899
Likes: 0
Default RE: Rollin on New MEATS!

ORIGINAL: Rot Weiss Essen

mmstar23, I would stay away from the add a leaf, I had a pair on my old truck and they were as noisy as hell and within 20 months one of them broke right in half. I will never go that route again. There are better ways for more lift in the rear IMO.
thanks man. what are my other options for the rear then? what do you think about the little blocks with longer U bolts?
 
Reply
Old Apr 16, 2008 | 03:28 PM
  #34  
XxSilentHawk99xX's Avatar
XxSilentHawk99xX
Captain
Joined: Oct 2007
Posts: 627
Likes: 0
From:
Default RE: Rollin on New MEATS!

That's what I'm thinking about doing....Rough Country 1" Blocks with U-bolts...I know that RC and Fabtech make a lot of block kits...
 
Reply
Old Apr 16, 2008 | 04:01 PM
  #35  
oefootball_70's Avatar
oefootball_70
Champion
Joined: Apr 2007
Posts: 4,829
Likes: 3
From: Olathe, KS
Default RE: Rollin on New MEATS!

I got the 3 inch rough country, they work great. And they give me 3 full inches.
 
Reply




All times are GMT -4. The time now is 10:44 PM.