When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey guys, I just got an 04 1500 5.7 and am looking for suggestions for power adders on a relatively limited budget. I've already got headers intake exhaust and a prograqmmer, so what next? thanks for the help guys
i was definately thinking of a cam. Im not worried about the install i can do that part. Anyone of you guys with aftermarket cams what kind do you run and what kind of proformance gains did you see thanks.
I am just waiting it out for my 5 years to run out on my warranty since the miles are not going to hit it first(at 57,000 now) and then I am going for the STS turbo system. I want the instant kick in the *** all at one time... even if it costs me almost $4000 to do it.
For a street truck I'd do gears. What gears are in it now? If you don't plan on doing alot of 1/4 mile racing 4.56's are nice. A 6.1 cam doesn't need a tune but the bottom end is going to be lackluster. At the minimum with any cam your going to need valvesprings and pushrods. The 5.7 and 6.1 cams use a different base circle so the puchrods are different lengths. The 6.1 cam has a pretty fast ramp that is going to be hard on 5.7 springs and most of the aftermarket cams are a little to agressive for the stock springs.