3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Fender flares question..

Thread Tools
 
Search this Thread
 
Old Apr 30, 2008 | 09:19 PM
  #1  
cyclone429's Avatar
cyclone429
Thread Starter
|
Record Breaker
Joined: Mar 2006
Posts: 2,165
Likes: 2
From: Alberta
Default Fender flares question..


I'm considering going to a 285 70 17 all terrain BFG tire on my 2500 Ram, ( Power wagon size,) I have the BFG R/T T/A on now 265 70 17, and the stock tires have kicked up a lot of crap and my lower rocker pannels, mega Mega paint chips, even with mud flaps.

Are thier flares on the market that do not have to be screwed into the fender?, over the long hall, I'm worried abought rust in the screw holes.

I don't like the looks of fender falres, due to the stuck on look, And I'm never going to lift my truck, but with a wee bit large tire, I aint going to have any paint on my rocker panels.
 
Reply
Old Apr 30, 2008 | 11:26 PM
  #2  
firemedic740's Avatar
firemedic740
Veteran
Joined: Mar 2008
Posts: 311
Likes: 0
From:
Default RE: Fender flares question..

get screws that don't rust and fill the hole with silicone- problem resolved.
 
Reply




All times are GMT -4. The time now is 08:28 PM.