3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help with 2003 dash

Thread Tools
 
Search this Thread
 
  #1  
Old 07-17-2008 | 11:11 AM
ray97's Avatar
ray97
Thread Starter
|
Veteran
Joined: Apr 2006
Posts: 464
Likes: 0
From: Yuma, Az.
Default Help with 2003 dash

Since my dash is cracked I am thinking about replacing the top two pieces of my dash myself. The dealer told me worse case that it would be 6 hours labor=540 bucks because they said they are not sure how much into the dash they have to go. But it appears that the top pieces would come off without taking the whole dash apart but I am not sure.I know the piece closest to the windshield just pops off, held by clips. Has anyone had there dash apart or any techs out there know something that I don't(I am sure is plenty)Thanks in advance for any help.
 
  #2  
Old 07-17-2008 | 04:59 PM
ray97's Avatar
ray97
Thread Starter
|
Veteran
Joined: Apr 2006
Posts: 464
Likes: 0
From: Yuma, Az.
Default RE: Help with 2003 dash

Anybody????? Parts/Service you out there??????
 
  #3  
Old 07-19-2008 | 04:23 PM
ray97's Avatar
ray97
Thread Starter
|
Veteran
Joined: Apr 2006
Posts: 464
Likes: 0
From: Yuma, Az.
Default RE: Help with 2003 dash

Bumplast time.
 
  #4  
Old 07-19-2008 | 06:58 PM
z3r0's Avatar
z3r0
Rookie
Joined: Jul 2008
Posts: 56
Likes: 0
Default RE: Help with 2003 dash

i've had a diffrent car apart that far that top pad should only be just bolted in after you pop every panel off
 



Quick Reply: Help with 2003 dash



All times are GMT -4. The time now is 08:11 AM.