I bought a HID kit from a guy off of another forum. He hasn't been on in two days and nobody is responding to my question on the forum. I though I would try here. The relay only has one "blue" plug that I assume plugs into the factory harness. Right? Shouldn't I need two of the blue plugs, one for the driver side light, and one for the passenger side? Also am I supposed to have two grounds and one hot wire? One ground for the driver side ballast, one ground for the passenger side ballast, and one hot wire to power all of it? Is that right?

 

yes kinda but you can just use the same ground for both i got my ground for the battery

 

So do I plug the "blue plug" into only one factory harness? Or do I need two blue plugs?

 

well mine came with 2 but they are not all the same so i would say try it and see wat it does

 

you only need one blue plug, its using the plug to trigger both sides of the hid's.

i put a kit on my dakota like this and it worked great.