i went a picked up a set of 20"s with 33 toyo m/t on them and they are off a jeep wrangler but are a 5 lug universal will they fit and will i need spacers/ how big of spacers? i think there 33x12.5ishx20 i have a 03 ram 1500

 

Well, the lug pattern, not sure. You do not list what patterns this universal wheel will fit, but chances are it will have the right pattern on it somewhere.

As for the tire size it should also fit, just depends on the offset but judging by the pic it looks like it will be OK.

 

yoooo..those are the tires ima get. im keep the stock rim but im get the toyo m/t 33in. lemme know what you think. i did hear that since they were so wide ima have to get like 1/4 spacer.but since you got the aftermarket wheels you prob wont

 

just buy looking at them and setting them next to the truck im really liking them and i need spacers too

 

ya. shouldnt be problem though. hit us up with some pics when you get on man

 

Yeah definitely put some pictures up when you get them on. They look good enough not on the truck lol

 

yeah they look like they should fit fine i have 285/70/17 bfg mudders on the stock rim and they fit... barely but they fit

 

I think that your deff have to buy 1/4 spacers I did

 

sorry but I have to call you on this one. There's nothin in the pic that shows the back side. For all we know it could have 2" of solid backing so that would put the wheel outside more. Or it could have no backing which would push the wheel inward more. You can never tell by looking at it's face.
The bolt patterns are not the same, so if there's 2 patterns you may have a shot. I just found those at Tire Rack and if they were off of a 07+ wrangler your gonna be sol on the backspacing. If they were off an older one(pre 06) you will be fine.

 

please do post pics. i actually like those rims. i saw the toyo mts on a brand new ram a few weeks ago and absolutley loved them!!!