3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

well they fit

Thread Tools
 
Search this Thread
 
  #11  
Old 01-12-2009 | 08:37 PM
CreativeOffroad's Avatar
CreativeOffroad
Captain
Joined: Dec 2008
Posts: 578
Likes: 0
From: Orange County
Default

Depends what you mean by work on the inside. If you mean a system (subs, amps, etc.) then I vote for the lift because I'm an offroading kinda guy. But if you mean inside like under the hood/performance mods (intake, chip, etc.) then you'll be able to get alot of stuff done for the same amount the lift alone will cost. If you plan on offroading at all i'd also recommend smaller wheels (17's or 18's) but that's just me.

Let us know what you decide to do and put up some pics when you're all done!
 
  #12  
Old 01-12-2009 | 08:48 PM
grap660's Avatar
grap660
Thread Starter
|
Rookie
Joined: Oct 2008
Posts: 95
Likes: 0
From: san diego, ca
Default

by inside i mean both stero system stuff and performance. i dont really offroad the only thing i do with my dodge that close to offroading is hauling a trailer full of quads and dirt bikes to glamis or ocotillo and plus i only want the lift cause it make my truck look meaner
 
  #13  
Old 01-12-2009 | 10:03 PM
SmokeySportRam's Avatar
SmokeySportRam
Captain
Joined: Mar 2008
Posts: 584
Likes: 0
From: Middle of IOWA
Default

do what YOU want to do
 
  #14  
Old 01-13-2009 | 01:32 AM
CreativeOffroad's Avatar
CreativeOffroad
Captain
Joined: Dec 2008
Posts: 578
Likes: 0
From: Orange County
Default

Well then my vote goes for the lift. Jack that truck to the sky!
 




All times are GMT -4. The time now is 03:52 PM.