Custom sub grills
Thread Starter
|
Moderate User
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
I have 2800watt JBL Crwon amp to those subs. They are as loud as most 12's. No vibrations on the *** cushion. Just the usual bassy feel in the air.
I built my box as low as possible so that the sub wouldn't even touch the underside of the seats. I spec'd out the grills so they push the underside up a little, but not they will not rip the seat and they have plenty of room for the sub excursion as many box's don't allow that between the sub and seat.
As stated in my origional post. I paid $33 shipped and I designed them
3rd gen Ram, Newbies
Joined: May 2008
Posts: 3,815
Likes: 0
From: Chicago
I ordered up some custom grills off an Ebay member that said he would make me anything I needed. I wanted grills that put the seat bottom as far away as possible without hitting the woofer on the brackets and interfering with the functionality of the seat. I measured the seat when it was down so I could get the proper measurements. The seat I must say, sits perfectly on the brackets per my custom enclosure. The seat sits on both bars very evenly which was hard to determine what the proper length was. I designed the grills and the guy made them for me. They only cost $33 shipped! Super cheap. Here's the guy that built per my specs 
http://myworld.ebay.com/affordable_quality_audio Now, you may have totally diff measurements and they did take him about 3weeks to make? Anyway, here's what I cam up with!
