my 2007 ram qc 4x4 laramie leveled with add a springs on the rear w/2.5 tons in bed
#1
my 2007 ram qc 4x4 laramie leveled with add a springs on the rear w/2.5 tons in bed
just a pic of my truck working today. I forgot to take a pic before I removed some. just imagine it sitting another inch lower in the rear. when I would gas it hard from a stop my hitch would hit the pavement
Last edited by morepower29; 03-11-2009 at 05:37 PM.
#6
#7
Trending Topics
#8
#9
the worst part is I have and extra spring in the back. Over the summer I had a ladder rack on with 64 2x6x20's a couple of sheets of plywood and a couple 4x4x12's on it. In the bed I had 50 8" blocks and 6 square (18 bundles) of shingles. She was sittin low then. that was before the springs. I had so much weight on the ladder rack it actually pushed down in my bed rails. That is my I now have the plastic bed rail caps. Yes I bought the truck for work. On the weekends you would never know it though. A couple of weeks ago I used my buddies backhoe and hauled it to and from the job. He said it with the trailer was approx. 18000 lbs. Pulled it 40 miles each way. That made the truck work. With my edge evolution I can monitor exact fluid temps and the only one that ran significantly hotter was engine oil and it ran about 50 degrees hotter. It stayed at about 245.
#10
in this video you will get an idea of how much space is usually in my wheel wells http://www.youtube.com/watch?v=-jiG4Px6tQo