3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2006 RAM 2500 air draft

Old Feb 19, 2009 | 10:14 AM
  #11  
R1mark's Avatar
R1mark
Registered User
Joined: Feb 2009
Posts: 37
Likes: 0
From: Wisconsin
Default

if u decided to do it your self you don't need much for tools. a small socket set and a couple of #2 phillips screw drivers. if needed i could give a more step by step to get the dash and dash frame out.
 
Reply
Old Feb 20, 2009 | 03:03 AM
  #12  
Fris's Avatar
Fris
Professional
Joined: Feb 2008
Posts: 165
Likes: 1
From: El Monte, CA
Default

yes please on the step by step if you can.

i hate this problem on my truck! i can always smell the outside air, cold draft inside the cab, loud air blowing noise when its set on high, but very weak coming out of vents.
 
Reply
Old Feb 21, 2009 | 07:30 PM
  #13  
R1mark's Avatar
R1mark
Registered User
Joined: Feb 2009
Posts: 37
Likes: 0
From: Wisconsin
Default

another thing u could try. leave the pillow in and take the blower motor out to take the door out then put the blower motor back in. That door is more than likey laying above the blower. on mine i was able to take the motor out and remove the door but to fix the problem correct you need to replace the assembly. that should hopefully give you more heat
 
Reply
Old Mar 1, 2009 | 09:20 PM
  #14  
raven_06quad's Avatar
raven_06quad
Registered User
Joined: Mar 2009
Posts: 7
Likes: 0
Default

My 06 was (is) making a whistling noise from around the passenger area. It seems to be coming from behind the glovebox. We took the truck out today and noticed that the even when adjusting the blower motor speed, the airflow was nil. The motor changed speeds just little to no difference in air flow out the dash...same issue as above? Or is it the blend door? melhoff13 my wife was in the same boat tonight. A wife with cold legs is not a happy camper... Suggestions?
 
Reply
Old Mar 1, 2009 | 09:47 PM
  #15  
raven_06quad's Avatar
raven_06quad
Registered User
Joined: Mar 2009
Posts: 7
Likes: 0
Default

This may help. Looks like it's a TSB (from 2003) issue:
http://dodgeram.info/tsb/2003/24-004-03.htm
 

Last edited by raven_06quad; Mar 1, 2009 at 09:53 PM.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:12 PM.