3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Whats your workspace like?

Thread Tools
 
Search this Thread
 
Old Feb 22, 2009 | 02:21 PM
  #1  
Redone4x4's Avatar
Redone4x4
Thread Starter
|
Record Breaker
Joined: Oct 2005
Posts: 1,276
Likes: 0
From: Las Vegas
Default Whats your workspace like?

another thread inspired me to ask, what kind of workspace do you guys have? driveway? workshop? 2 car garage? just wondering. I live in an apt. and have a 1 car garage, but at work I have a 4600 sq ft. hanger with a 5 ton remote control crane, and thats where my tools are and im fortunate enough to be able to work on my stuff there. its heated and cooled also with air lines everywhere, nice epoxy floor, fridge, etc... my actual garage is pretty bare though since everything is at work.
 
Reply
Old Feb 22, 2009 | 02:28 PM
  #2  
SilverBullet08's Avatar
SilverBullet08
Grand Champion
Joined: Dec 2008
Posts: 6,556
Likes: 1
From: TX
Default

my driveway or if thats full then the street lol
 
Reply
Old Feb 22, 2009 | 03:32 PM
  #3  
bananafarmer's Avatar
bananafarmer
Professional
Joined: Sep 2008
Posts: 108
Likes: 0
Default

i either work in my driveway, our three car garage or my gf's dad's shop where he has all the tools and a car lift and everything i could possible need
 
Reply
Old Feb 22, 2009 | 03:37 PM
  #4  
Ramdamit98's Avatar
Ramdamit98
Captain
Joined: Mar 2006
Posts: 564
Likes: 0
From: Houston, B.C.
Default

Gravel driveway. It is covered with a two car carport but it's gravel and definetely not heated. Not alot of work getting done in the winter. Getting it off the ground requires the trucks scissor jack and some jack stands.
 

Last edited by Ramdamit98; Feb 22, 2009 at 03:39 PM.
Reply
Old Feb 22, 2009 | 03:37 PM
  #5  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default

Usually driveway, but I do have a very cramped 2 car garage that has a 63 F100 and my 88 5.0 Mustang in it. When the Ram and Caliber are paid off, I intend on tearing it down and building a 30'x50' garage to hold up to 6 vehicles. My little gagrage does have a gas furnace and central a/c though
 
Reply
Old Feb 22, 2009 | 04:01 PM
  #6  
V_Scapes's Avatar
V_Scapes
Record Breaker
Joined: Sep 2008
Posts: 1,018
Likes: 0
From: NJ
Default

my 2 car garage that my truck barely fits in and a small selection of tools in an empty tool chest. but i get by
 
Reply
Old Feb 22, 2009 | 04:16 PM
  #7  
AF_HEMI's Avatar
AF_HEMI
Champion
Joined: Jan 2009
Posts: 3,411
Likes: 1
From: Minot AFB, ND in person, the 'burgh at heart
Default

Base Hobby Shop. Hydrolic lifts for $4/hr and free tool rental...any tool you can imagine
 
Reply
Old Feb 22, 2009 | 05:29 PM
  #8  
Off_Road_Teacher's Avatar
Off_Road_Teacher
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
Default

I used to work in my driveway but I got sick of that one year so I built a 2 car garage onto the back of my house. Ran heat and a/c out there along with 220 electric, a compressor and a gym upstairs. Now I can work in comfort year round
 
Reply
Old Feb 22, 2009 | 05:30 PM
  #9  
Bertens's Avatar
Bertens
Professional
Joined: Feb 2009
Posts: 135
Likes: 0
From: Ontario
Default

My dad has a big shop with a lift and all of the tools that you would need so I just work on my truck there.
 
Reply
Old Feb 22, 2009 | 05:43 PM
  #10  
SeMiGoD's Avatar
SeMiGoD
Record Breaker
Joined: Mar 2008
Posts: 1,307
Likes: 0
From: Lincoln, ND
Default

I just built a new house with oversized 2 stall garage with heat, ac, 220 water and floor drain. Im planning on buying a compressor, welder and i just got an oven so i can powdercoat as well
Ill be epoxying the floor this spring.
It was supposed to be a 4 hole garage til the city put the kibosh to that with their stupid a$$ codes...
 
Reply



All times are GMT -4. The time now is 02:45 AM.