Hey yall

Need to get back in touch with my "Inner Redneck". Someone please post the Magnaflow PN for a single in - single out replacement muffler. I believe it is 3 and 3 but want to make sure.

Buggy is a 2008 QC Hemi "Lone Star Edition"....... but of course!

 

go to www.magnaflow.com dig your own hole man!!!!
but +1 on the magnaflow

 

I found my magnaflow on ebay for 100 bucks delivered. Brand new etc. The ebay store i looked at had all the dimentions etc so i knew which 1 to buy based on the measurements.

 

Remember they sell different lengths...the longer the quiter it'll be. The muffler in their catback kit I believe is 24"...mines 18" and it's decently loud at part throttle with a great tone but ripps at WOT which I love.

 

magnaflow told me that the muffler they sell in their cat back kits is a 5x8 oval, 18in long. i had the 14in on my ram and it sounds awesome. Im actually buying another one now single in single out to put in my factory 3in piping. The one i had on my truck was dual out for the system i had made when i 1st got the truck. the part# im going with is either 12219 in satin or 14219 in polished. That is a single 3" in single 3" out center/center in 14 in long 5x8 oval. Hope this helps

 

You are the man!

Thanks

 

I have a 14" magnaflow on mine, and its sounds pretty good. its not too loud, and its not too quiet

 

I forgot who's vid this is but he posts here...if that muffler that came with his catback system isn't 24" I dunno what is. http://www.youtube.com/watch?v=aVfCJ2_qYrg That thing is huge.

 

ya, that must be a 24'' and its not even louder then stock... lol

 

I ran the same length as stock SI/DO and i have a nice throaty rumble. Not too loud, but enough to know im coming especially when i drop the hammer.