3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

02 t-bar lift

Thread Tools
 
Search this Thread
 
Old Mar 1, 2009 | 01:12 AM
  #1  
Skeeter_Eater's Avatar
Skeeter_Eater
Thread Starter
|
Rookie
Joined: Mar 2008
Posts: 75
Likes: 0
From: Stephenville, TX
Default 02 t-bar lift

Can someone tell me how to do it and give me some pics please.
thanks in advance
 
Reply
Old Mar 1, 2009 | 01:17 AM
  #2  
Redone4x4's Avatar
Redone4x4
Record Breaker
Joined: Oct 2005
Posts: 1,276
Likes: 0
From: Las Vegas
Default

https://dodgeforum.com/forum/3rd-gen...sion-lift.html

theres a bunch of posts in this forum about it...
 
Reply
Old Mar 1, 2009 | 04:35 PM
  #3  
Skeeter_Eater's Avatar
Skeeter_Eater
Thread Starter
|
Rookie
Joined: Mar 2008
Posts: 75
Likes: 0
From: Stephenville, TX
Default

i still dont know where the bolt is to tighten the t-bars, please help
 
Reply
Old Mar 1, 2009 | 04:51 PM
  #4  
Redone4x4's Avatar
Redone4x4
Record Breaker
Joined: Oct 2005
Posts: 1,276
Likes: 0
From: Las Vegas
Default

look under ur truck, about where ur driver door is. there is a long bar running from the front susp. to the frame back there. there are 2 bolts underneath each bar, one on each side.
 
Reply
Old Mar 1, 2009 | 04:53 PM
  #5  
bigwood's Avatar
bigwood
Registered User
Joined: Feb 2009
Posts: 18
Likes: 0
Default

Originally Posted by Skeeter_Eater
Can someone tell me how to do it and give me some pics please.
thanks in advance
do some research, dont expect to come in here and expect us to tell you exactly what to do, its been done many times. no offense intended.
 
Reply
Old Mar 1, 2009 | 04:58 PM
  #6  
Redone4x4's Avatar
Redone4x4
Record Breaker
Joined: Oct 2005
Posts: 1,276
Likes: 0
From: Las Vegas
Default

here, allow me to use the search function for u...lol. just type in "torsion bar" and start reading the threads...but here is a quote from just one of the many posts on it...

Originally Posted by manogmin
the torsion bars are the stock suspension system for the 02-05 4x4's they are adjustable by two 18mm bolts about in the center of the truck on the crossmember under the tranny. you can tighten the bolts to raise the front of the truck, but the two downfalls are that it will stiffen the ride, and if you go too high your shocks will top out over bumps.
 
Reply
Old Mar 1, 2009 | 06:45 PM
  #7  
Skeeter_Eater's Avatar
Skeeter_Eater
Thread Starter
|
Rookie
Joined: Mar 2008
Posts: 75
Likes: 0
From: Stephenville, TX
Default

Originally Posted by bigwood
do some research, dont expect to come in here and expect us to tell you exactly what to do, its been done many times. no offense intended.
Why do research if this is what the forum is for is asking questions? The reason i wasnt doing any searching was because i just cleaned my throttle body and did an oil change. And the other reason i asked was because i would od like some pics, but im sure ill figure it out if i dont.
 
Reply
Old Mar 1, 2009 | 07:05 PM
  #8  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

They are not being ugly. It's just the data is here, in this section. I've posted instructions with pics myself quite a while ago. Why have redundant data here? Simply do a search using the search feature here, and within minutes, I'm sure you'll find the information you are looking for...
 

Last edited by HammerZ71; Mar 1, 2009 at 07:18 PM.
Reply
Old Mar 1, 2009 | 07:14 PM
  #9  
bdhuntr's Avatar
bdhuntr
Veteran
15 Year Member
Joined: Jun 2007
Posts: 387
Likes: 5
From: Bel Air, MD
Default

Originally Posted by bigwood
do some research, dont expect to come in here and expect us to tell you exactly what to do, its been done many times. no offense intended.
No offense intended? For a guy with a join date of Feb 2009 you come off like you started this website.
 
Reply
Old Mar 1, 2009 | 07:24 PM
  #10  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

Ok, for the sake of stopping sh*t before it starts. I did a search, this is the latest one that hit, took about 8 seconds for me to find. Here is a pic from 02Steve1990's post:




 

Last edited by HammerZ71; Mar 1, 2009 at 07:31 PM.
Reply



All times are GMT -4. The time now is 11:12 PM.