When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I do know that when you put on a leveling kit, you need to get an alignment done on your vehicle. Many people here have done a leveling kit, so I'd suggest getting an alignment afterwords.
so you guys hear anything about this wobble on some 4x4 trucks after leveling?
yes, but it seems to be hit and miss. My buddy has the same front end leveling kit that i have, and his is fine. mine however has a very bad shudder in 4x4 hi mode, at all speeds, but worse while accellerating.
it sucks! i think part of the problem is the inner CV joints. They can only handle up to ~15 degrees of pinion angle. The leveling kit put them at more than 15 degrees. I am planning to buy a set of KORE hi angle inner CV joints and change them out. If that takes care of the shudder problem I will let everyone know.