How can you find out if your truck originally came with keyless entry? I have a 06 1500 SLT, is there an rpo code to look for or anything?

 

Request a build sheet from Chrysler.

 

Request a build sheet, usually an initial clue is whether you have a keyhole on the passenger side front door handle. USUALLY...if you only have a driver's keyhole then it was built with RKE. If you have one on the passenger side then USUALLY it wasn't. I capaitalize the usually because there have been discrepancies to this rule, but for the most part is true.

 

Well i only have the driver side key hole, anyways i requested a build sheet and within a couple hours got it from dodge. I do have keyless entry, so now to order a key fob. But are the only ones available for the '06 the fobs with the built in key? I know provramming the fob isnt hard and getting the key cut is cheap but getting the key itself programmed isnt. I only have one programmed key, i mention that cause the manual says of you have 2 keys you can program more yourself. So is there a stand alone fob maybe from an older year that i can use?

 

Pretty much, all the ones I have seen with a CAN bus vehicle anyhoo (my 06 Charger has it).

 

The only reason YOU would ground pin 4 to pin 1 is because pin 1 should be a ground
clearly this is not the case on these models

So ground pin one to any metal ground like the brake pedal or any black wire going to the frame

Not sure why this has not come up already because its so simple

 

I paid $140 inMiami

 

Did the unlock button programming method and it worked!
I been able to program a new key bought on ebay,,,, same key my dealer was not able to program!!!!!
thank you!

 

What year is your truck? Can you explain the #unlock button programming method"