When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
get a crap load of black spray paint... take off the license plate and just start sprayin! dont stop till the cans run dry! haha oh yeah, THEN put the license plate back on!
your a idiot !
now back to the post...
nice truck brit... looks like you have a real good canvus to work with. you want to lift or keep her the same ??
The center wood bezel is actually attached to the silver center dash. You have to remove the whole thing. Since you have a quad cab, i don't know if you have the screws or not, but they should be above the cup holders if you do. I think only flip down cup holders had screws, not 100% sure. Other than that the whole thing just pulls off. Start in the top left corner closest to the gauges and work your way around. It's snapped in pretty tight. I'm trying to find the removal picture.
This is what it would look like, I'll try to get the instruction picture.
Last edited by Got_Hemi44; Jul 13, 2009 at 06:52 PM.