When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
You can clear 37's on 6''s of lift on the 4x4's. Nitto has a total of 6''s of lift on his truck so he had to do some very minor trimming of his wheel well, which he did mostly for more articulation room for his off roading in colorado. You can easily clear 37's on 7''s of lift and with 8.5''s you could probably clear 38x14.5's if you desired. There used to be a guy that had a fabtech 6'' susp w/3'' BL and he stuffed 38x15.5 toyo mt's his truck.
Yeah I had to do a little trimming with a 3" body lift, 3" rear add-a-leaf and 3" torsion keys. But if you do a 5.5" suspension lift and a 3" body you will clear them fine with the right offset wheels. And if I was you I would limit my lift to a 4" suspension and a 3" body that way you will have better angles on your front end. And you can still clear 37" with that setup.
There used to be a guy that had a fabtech 6'' susp w/3'' BL and he stuffed 38x15.5 toyo mt's his truck.
Yeah, I remember him. He had a black 1500. Definflicka? Something like that. I have searched for him, but he hasn't been back since this site had the face lift.