3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Guys with 305's on stock 20's chime in.

Thread Tools
 
Search this Thread
 
  #1  
Old 07-25-2009, 11:10 AM
dirtydog's Avatar
dirtydog
dirtydog is offline
Moderate User
Dodge Forum Moderator
Thread Starter
Join Date: Oct 2008
Location: Albany, NY
Posts: 17,003
Likes: 0
Received 19 Likes on 9 Posts
Default Guys with 305's on stock 20's chime in.

So i was looking under my truck the other day and noticed how close the tire is to the upper control arm. Now the stock 275/60/20 is 10.8" wide by industry standards and is barely .5" away from my upper control arms.
putting 305's on there would increase the width to 12". That's another 1.2" in overall width. That means .6" get added to each side of the stock size tire to get to the 305 size. i don't have room for .6" of clearance. Any guys have issue's? i haven't heard of anyone complain of 305's hitting on stock 20's with no spacers. I just wanna get my facts straight. Here are pics of my tire and UCA. The gap looks larger than what it is so I put my skinny pinky finger in there to show you perpective.


edit*** I have to add this in because I guess I wasn't specific enough. Guys running 305's on stock 20's, HOW CLOSE to the upper control arm are you? That was really my question.
 

Last edited by dirtydog; 07-25-2009 at 04:41 PM.
  #2  
Old 07-25-2009, 01:02 PM
John  M's Avatar
John M
John  M is offline
Record Breaker
Join Date: May 2007
Location: Milledgeville, GA
Posts: 1,152
Likes: 0
Received 2 Likes on 2 Posts
Default

Mine have been in place for almost 2 years with no problems.
 
  #3  
Old 07-25-2009, 01:16 PM
Got_Hemi44's Avatar
Got_Hemi44
Got_Hemi44 is offline
Record Breaker
Join Date: Nov 2008
Location: Dayton, Ohio
Posts: 1,751
Likes: 0
Received 0 Likes on 0 Posts
Default

You should be fine. I'm running 305/50/20s and haven't had any issues. Can do full turn without anything rubbing.
 
  #4  
Old 07-25-2009, 04:30 PM
06 Ram5.7's Avatar
06 Ram5.7
06 Ram5.7 is offline
Veteran
Join Date: Aug 2008
Location: CT
Posts: 482
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Got_Hemi44
You should be fine. I'm running 305/50/20s and haven't had any issues. Can do full turn without anything rubbing.
Do you have the stock 20" rims*, and if so, are you using a spacer? I've been wondering the same thing, because I was looking at getting the Cooper Zeon's in 305/50r20, but didnt want to pay for new rims. And I have just about the same amount of room as dirtydog showed in his pics.

*Well, nevermind about the rims, I see in your sig pic you do have the stock 20" rims.
 

Last edited by 06 Ram5.7; 07-25-2009 at 04:32 PM.
  #5  
Old 07-25-2009, 04:41 PM
dirtydog's Avatar
dirtydog
dirtydog is offline
Moderate User
Dodge Forum Moderator
Thread Starter
Join Date: Oct 2008
Location: Albany, NY
Posts: 17,003
Likes: 0
Received 19 Likes on 9 Posts
Default

I have to add this in because I guess I wasn't specific enough. Guys running 305's on stock 20's, HOW CLOSE to the upper control arm are you? That was really my question. I know guys are running the set-up so it wasn't a ? of whether or not it will work. Thanks
 
  #6  
Old 07-25-2009, 09:48 PM
Got_Hemi44's Avatar
Got_Hemi44
Got_Hemi44 is offline
Record Breaker
Join Date: Nov 2008
Location: Dayton, Ohio
Posts: 1,751
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 06 Ram5.7
Do you have the stock 20" rims*, and if so, are you using a spacer? I've been wondering the same thing, because I was looking at getting the Cooper Zeon's in 305/50r20, but didnt want to pay for new rims. And I have just about the same amount of room as dirtydog showed in his pics.

*Well, nevermind about the rims, I see in your sig pic you do have the stock 20" rims.
No I'm not running a spacer.


Originally Posted by dirtydog
I have to add this in because I guess I wasn't specific enough. Guys running 305's on stock 20's, HOW CLOSE to the upper control arm are you? That was really my question. I know guys are running the set-up so it wasn't a ? of whether or not it will work. Thanks
I just went out and looked. I have about 3/16-1/4 inch between the tire and the UCA. Couldn't even fit my pinky in it
 
  #7  
Old 07-25-2009, 09:54 PM
06 Ram5.7's Avatar
06 Ram5.7
06 Ram5.7 is offline
Veteran
Join Date: Aug 2008
Location: CT
Posts: 482
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Got_Hemi44
No I'm not running a spacer.

I just went out and looked. I have about 3/16-1/4 inch between the tire and the UCA. Couldn't even fit my pinky in it
Well that is good to know, since I didn't know if they would fit or not with the stock rims. And a correction, I was looking at the LT305/55r20, not the 305/50r20, even though the LT305/55 tires cost $100 more than the 305/50 tires.
 
  #8  
Old 07-25-2009, 11:18 PM
hemipower05's Avatar
hemipower05
hemipower05 is offline
Professional
Join Date: Mar 2009
Posts: 226
Likes: 0
Received 0 Likes on 0 Posts
Default

i have those tires and i have no problems except if i turn my wheels alll the way to the left my tires will rub at about 1/8th away from turnin the steering wheel all the way to the left i have no problem on the right side tho lol ive always thot that was weird
 
  #9  
Old 07-25-2009, 11:22 PM
nvisciani's Avatar
nvisciani
nvisciani is offline
Rookie
Join Date: Sep 2006
Location:
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
Default

Have Pirelli Scorpion ATR 305/55/20's on Stock rims on my 04 4x4 QC. They are 33.2" vs the stock 33" of the 275/60's - fit great - and look massive over the stockers.... Plenty of clearance and no rubbing....
 
  #10  
Old 07-25-2009, 11:59 PM
abarmby's Avatar
abarmby
abarmby is offline
Champion
Join Date: Nov 2005
Location: North Eastern England
Posts: 2,875
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by nvisciani
Have Pirelli Scorpion ATR 305/55/20's on Stock rims on my 04 4x4 QC. They are 33.2" vs the stock 33" of the 275/60's - fit great - and look massive over the stockers.... Plenty of clearance and no rubbing....
Any pics please??
Al.
 


Quick Reply: Guys with 305's on stock 20's chime in.



All times are GMT -4. The time now is 02:26 AM.