When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
this is one of the better kits. they have a more expensive version that involves more work on the front, changing your spindles. it was designed for drive way installation. maybe a 6-7 with proper tools
it is a pita but well worth it. cant wait to see it. i already have a guy lined up to buy my rear bumper but he also want my front, i just need to get the 530.00 its going to take to get what i need
yes, you should deff drop it! kits can range anywhere from $400 all the way up to like $900. it all depends on what you want. 2/4's are on the cheaper side. as for the difficulty of installation... id say about a 4. its not hard, but it would be alot easier if you have an extra set of hands. my buddy and i did my truck in like 4 hours.
I very much agree, my truck has always sat lower than the other stockers. The front had about an half inch clearance on the bumps. And the rear is level with 1 1/2" shackles and O/L and bump stops removed. I plan to go 2" spindles and a modified rear springs to come down a little more.