When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey guys, I'm trying to decide between the McGaughy's 2-4 drop or the Ground Force 2-4 drop. I can get both for the about the same price, but just not sure about which one. Which would you guys recommend? I'll be putting on the kit myself, any advice on putting these kits on? Thanks
if i remember right the mcgaughy's is the easier more user friendly install...advice take your time and make sure everything is right and tight everything.....
hey man i just put the mcghauys kit on less than a month ago and it wasnt too bad at all 2 jack stands 2 jacks and air tools and a couple of semi mechanical savvy friends. it took us about an hour for the front and about 2- 2 1/2 for the back... you can get away with doing the front end without having to bust the ball joints open if you remove the springs front the bottom. just make sure that like jay said everything is tight. i say mcguahys man. mine rides great and controls awesome just watch big holes and bumps bc u WILL bottom out lol! Here is how she sits with the mcguahys 2/4.5 drop... new rims and hopefully bags soon
I appreciate it guys. I really like the way your truck sits on the McGaughys kit...I believe I will probably go with them. Have heard nothing but good things about them.
alright guys! big time clutch question! i have the 2/4.5 drop on now and i wanna go lower! mcgaughy makes a 4/6 but i already have alot of the parts... what all do i need to get to go lower without having to do bags bc i aint got the money right now!
well in my honest opinion if you plan on baggin id leave it where its at because when you bag it all that stuff is pretty much useless i was thinkin lower but i want bags and im not gonna waste the money to put a kit on just to have custom stuff made in the long run ....now it may be a yr or so b4 i get to this but i still cant see thrown money away or even at to try to sell it afterwards but thats just me.....
most likely custom control arm and add baskets to hold bags rear remove leafs add links depends if you 4 link it add c-notch again bags and baskets.....lots of hoses and resheetmetal the bed it all depends how custom you get ......