Lowered Trucks: tech and info....
#912
#913
This is the Air bag setup I used. One call to them and it was at my door in 48 hours. I had a problem with a fitting and was taken care of within hours.
http://www.airliftcompany.com/index.html
I have a set of drop shackels if some wants to pay shipping. PM me.
http://i921.photobucket.com/albums/a...y/DSC01960.jpg
http://www.airliftcompany.com/index.html
I have a set of drop shackels if some wants to pay shipping. PM me.
http://i921.photobucket.com/albums/a...y/DSC01960.jpg
#914
#916
OK, so I got the vibration back today. I guess the other 3 hours I spent Sunday trying to fix it was for nothing. After more research today, I realized that I installed the axle saddles backwards. I believe I have the offset holes toward the rear of the truck and they should be towards the front. Guess I'll be ripping apart the rear end again. Fun! I was hoping I could install the spindles on my next day off. With this much practice, I think I can have the rear end ripped apart in about an hour.
#917
#918
all you need is these...http://moesperformance.com/index.php...Path=1_26_1172 id use the mcgaughys they are a great product...i don't know who told you you need hangers but...i have drop shackles and no over leaf so i sit perfectly level....hopefully soon ill be a 2/4 drop....in all honesty the shackles will only give 1.5" thats why i went thru the removal of the o/l leaf to get a full 2"....and mcgaughy's will get you closer to 2" than most other shackles....
#919
does anybody have anything to say about the mcgaughys 2 4 drop with the springs, not the spindles? I want to get this drop and its in my price range, but not if it doesnt do the job. I can spring for the drop with the spindles in a few months, but the 360 tag at stylin trucks the one with the springs is a pretty nice price.