3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Regular Cab Sub Box Options

Old Aug 31, 2009 | 12:06 AM
  #11  
Shiloh 24's Avatar
Shiloh 24
Thread Starter
|
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

The thing is for about 20 - 30 I could build one myself, and I don't really want it to stand up that high if I could get it closer back against the back wall and fairly low I would still have a little room to throw stuff back there.
 
Reply
Old Oct 1, 2009 | 06:07 PM
  #12  
nozmadd0x's Avatar
nozmadd0x
Veteran
Joined: Oct 2007
Posts: 340
Likes: 0
From: Franklin County, OH
Default



Here is my set up. Two 12" kicker cvr's. I custom made the boxes with 3/4" MDF. I ended up with about a half sheet left over after making both boxes. I think the dimensions were 15" wide x 16" high x 11.25"deep but not positive. If you only have a lightning 10" you could take off 3" on each side so it takes up less space. The seats also lean all the way back. I had the same problem as you, didnt want to give anything up but then I just decided thats what I have a bed for and anything else I just set on top of my amp. Also, I couldnt find anything for a regular cab so I had to make the design and figure it all out by myself. I have an 02 so the tray may be different but idk. PM me with any questions.
 
Reply
Old Oct 4, 2009 | 10:09 PM
  #13  
blackbetty696's Avatar
blackbetty696
Rookie
Joined: May 2009
Posts: 56
Likes: 0
From: florida
Default

yep i took out the center seat and dropped a 12'' infinity bridged with a 1000w xplode but i do like nozmadd0x set up-pretty baller dude!
 
Reply
Old Oct 4, 2009 | 10:16 PM
  #14  
damien1023's Avatar
damien1023
Veteran
Joined: Sep 2007
Posts: 301
Likes: 0
From: Florida
Default

Name:  IMG_0085.jpg
Views: 466
Size:  19.0 KB

Two 10's that sit right in the tray. The amp is under the drivers seat....
 

Last edited by damien1023; Oct 4, 2009 at 10:18 PM.
Reply
Old Oct 4, 2009 | 10:41 PM
  #15  
jarhead03's Avatar
jarhead03
Veteran
Joined: Jun 2009
Posts: 368
Likes: 0
Default

The SRT10's have a factory box for a singl ten I believe.
 
Reply
Old Oct 4, 2009 | 11:35 PM
  #16  
Shiloh 24's Avatar
Shiloh 24
Thread Starter
|
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

I like nozmads idea if only I had two of em. Would it sound effed up to only have one offset? I'm sure it will but just in case.
 
Reply
Old Oct 5, 2009 | 02:42 PM
  #17  
jarhead03's Avatar
jarhead03
Veteran
Joined: Jun 2009
Posts: 368
Likes: 0
Default

if your gonna build a box you can just center it in the tray, like i said before, there are srt10 factory boxes that fit there, It wont matter if its centered, your gonna get bass any where you put it, but in open areas youll get more clear bass than you would if its stuck behind your seat. I have two jl w3 v2's and a bridged 300/1 Fosgate mono amp and dropped to 2ohm . Perfect for my taste, cant here it outside much but will massage your back nicely and beat hard inside.
 
Reply
Old Oct 5, 2009 | 03:18 PM
  #18  
Ice-Forever's Avatar
Ice-Forever
All Star
Joined: Jan 2009
Posts: 757
Likes: 0
From: Dallas, Texas
Default

Originally Posted by truckin151
My box holds 2 12's right behind the seats. It sounds great and fits just right. Here is how my setup looks, I recently traded out the xplod's for some rockford fosgate's and they sound really good.

Are those shallow mount subs though?
 
Reply
Old Oct 5, 2009 | 03:21 PM
  #19  
Ice-Forever's Avatar
Ice-Forever
All Star
Joined: Jan 2009
Posts: 757
Likes: 0
From: Dallas, Texas
Default

Originally Posted by nozmadd0x


Here is my set up. Two 12" kicker cvr's. I custom made the boxes with 3/4" MDF. I ended up with about a half sheet left over after making both boxes. I think the dimensions were 15" wide x 16" high x 11.25"deep but not positive. If you only have a lightning 10" you could take off 3" on each side so it takes up less space. The seats also lean all the way back. I had the same problem as you, didnt want to give anything up but then I just decided thats what I have a bed for and anything else I just set on top of my amp. Also, I couldnt find anything for a regular cab so I had to make the design and figure it all out by myself. I have an 02 so the tray may be different but idk. PM me with any questions.
That looks really nice...How do you get that middle seat to scoot forward btw? haha. The one in my 05 doesn't move forward with my passenger seat like it did in my 04 and 02. I just figured it doesn't move forward, but maybe I'm wrong? I wanted my box to go in the middle but the seat was stopping the sub from hitting right/
 
Reply
Old Oct 5, 2009 | 04:11 PM
  #20  
nozmadd0x's Avatar
nozmadd0x
Veteran
Joined: Oct 2007
Posts: 340
Likes: 0
From: Franklin County, OH
Default

Thanks all. I have always had a single 8" or a single 10" and it doesn't sound too messed up but now that I have two 12"s the singles sound off. The SRT-10 sub is a 10" kicker I believe and I called the dealer and they said it would be something like $500, I have two 12"s, a 1200 watt amp, a new head unit, and all new mids and highs for around $650 so I weighed the pros and cons and decided to go the custom way. And Ice-Forever, I did not move the seat thats just how it is. I have 2 bucket seats and the middle seat doesnt move. I was going to do 3 12"s but the console was in the way.
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:08 AM.