When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I did see a ram in a magazine today said had tough country 6'' but when it showed the front he had huge coil spacers.. whats the difference using those and or using lift coils? id think them big spacers be dangerous??
I did see a ram in a magazine today said had tough country 6'' but when it showed the front he had huge coil spacers.. whats the difference using those and or using lift coils? id think them big spacers be dangerous??
the coil spacers are just as good as new springs the only difference is the new spring will ride better. i ordered 3 inch spacers and 3 inch blocks along with new longer shocks . anything over 3 inches you will need a new drop pitman arm and linkige (basicly a true lift kit). 3 inch or les you can just do coil spacers / springs and blocks with no other mods besides shocks
ya they are good people friendly as hell when you call them now my only concern is tires.. im doing 3" on the lift but just got new tires and im not gettin new ones so i hope they dont look to small?
I have a '06 diesel 4x4 Mega Cab that I just lifted using a SkyJacker system 5 inches. Wheels are 18"/tires 35" Now I have a bad vibration at hwy speed.....any advice??!!??