I recommend this one http://cpwstore.carpartswholesale.co...S-V218205.html or this one http://cpwstore.carpartswholesale.co...V4401171K.html, they are only like $70. They are exactly the same and are clones of the mopar/AEM intakes. The only issue w/ these is that the bracket on the filter end may break, but it's easy to rig up your own bracket if that happens. I have the spectre which is about $160 and is the same as the one's above except it has has moved the bracket to a sturdier location.

 

do those connect to the TB or to the little "hat"?

 

The one's I posted go straight to the TB, like this one

 

or you can go with my set up

 

female connected to throttle body?

 

yep...i'l get more pics 2morrow.

 

i've seen it...under your hood is sexy...
can u explain that to me? you made it with pvc, right?
what did u do about airtemp sensor?

 

drilled a hole and used a section of PVC tube that the sensor fits in. Then cut the length and epoxy glued it in...same with the breather tube for the heads.

 

same thing i did but i brought the filters down to where fog lights would be