DodgeForum.com

3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

removing tint

Thread Tools
 
Search this Thread
 
Old Dec 6, 2009 | 04:49 PM
Share
  #11  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default
Originally Posted by kicker417
You might have to use a knife scrapper if the tint is been there for to long
You'l always have to use a scraper even if the tint is new. Most tint will peel off by hand and then the razorblade is to scrape the adhesive glue off.


Starting in the corner is easiest. I can strip 2 front windows and have them sparkling in under 10 minutes.
 
Reply
0
Old Dec 6, 2009 | 05:19 PM
Share
  #12  
DodgeThunder's Avatar
DodgeThunder
Veteran
Joined: Aug 2008
Posts: 498
Likes: 1
From: Langley, B.C. Canada
Default
Use a heat gun if you have one to get the tint kinda bubbly and ready to come off.. With that and a razor blade scraper I did 2 front windown on my gfs car in a couple minutes..
 
Reply
0
Old Dec 6, 2009 | 07:41 PM
Share
  #13  
dave-o's Avatar
dave-o
Thread Starter
|
Veteran
Joined: Jun 2009
Posts: 421
Likes: 0
From: Huntington Beach, Ca
Default
Originally Posted by Altair
How long has it been on there? I removed some tint that was peeling from my old Integra when I bought it, had been on there 5 or so years. For the nightmare I went through to get that stuff off $40 is a bargain.
its only been on for 6 months, $40 may be worth it
 
Reply
0
Old Dec 6, 2009 | 07:42 PM
Share
  #14  
dave-o's Avatar
dave-o
Thread Starter
|
Veteran
Joined: Jun 2009
Posts: 421
Likes: 0
From: Huntington Beach, Ca
Default
Originally Posted by DodgeThunder
Use a heat gun if you have one to get the tint kinda bubbly and ready to come off.. With that and a razor blade scraper I did 2 front windown on my gfs car in a couple minutes..

no heat gun unfortunatly
 
Reply
0
Old Dec 6, 2009 | 09:23 PM
Share
  #15  
dirtydog's Avatar
dirtydog
Moderate User
15 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Oct 2008
Posts: 17,003
Likes: 21
From: Albany, NY
Default
Originally Posted by DodgeThunder
Use a heat gun if you have one to get the tint kinda bubbly and ready to come off.. With that and a razor blade scraper I did 2 front windown on my gfs car in a couple minutes..

Heat gun is not needed unless your not strong enough to peel the film off without.
Makes a mess IMO. Peeling off cold is best.
 
Reply
0
Back to Subforum
3rd Gen Ram Tech
View Next Unread
Subwoofer box ?'s




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 07:26 AM.