'03 1500 QC: Cobra 75 CB install
#1
'03 1500 QC: Cobra 75 CB install
Yeah, I know, its heavy tech, but this thing went in so slick I had to share
So, I got this off kjiji locally:
Time to install. 1 screw, and the whole centre dash panel falls off. And behind the heater controls is:
Nothing. Perfect Mount the base unit here:
2 small holes for the 2 screws & nuts (plus a little lock-tite to keep it good) 1 big hole to run the mic wire and:
Overall look:
Wiring. The lower cig lighter is constant 12V, so a quick tap, and a solid ground on an existing screw to the floor:
External speaker installed in glovebox. plenty loud
Mag-mount antenna on the roof:
And final interior shot:
When I unhook the mic, I can tuck the wire into the under-radio pocket, and there's no evidence. Slick
Also, props to the guys in my previous thread who pointed me to the constant 12V source.
So, I got this off kjiji locally:
Time to install. 1 screw, and the whole centre dash panel falls off. And behind the heater controls is:
Nothing. Perfect Mount the base unit here:
2 small holes for the 2 screws & nuts (plus a little lock-tite to keep it good) 1 big hole to run the mic wire and:
Overall look:
Wiring. The lower cig lighter is constant 12V, so a quick tap, and a solid ground on an existing screw to the floor:
External speaker installed in glovebox. plenty loud
Mag-mount antenna on the roof:
And final interior shot:
When I unhook the mic, I can tuck the wire into the under-radio pocket, and there's no evidence. Slick
Also, props to the guys in my previous thread who pointed me to the constant 12V source.
#4
#5
#7
Trending Topics
#8
#10