3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

found i leak today help!

Old Feb 2, 2010 | 09:36 PM
  #1  
Desert_Ram's Avatar
Desert_Ram
Thread Starter
|
Veteran
Joined: Dec 2009
Posts: 304
Likes: 0
From: The Styx,Arizona
Default found i leak today help!

So i found a small leak today in this radiator..... Im sorry if this might sound like a dumb question but i have a no clue as to what this radiator is for my best guess is for the trans cooling any help would be greatly appreciated also has anybody replaced one of these? how hard would it be? thanks all



Name:  get-attachmentaspx7.jpg
Views: 24
Size:  53.1 KB
 
Reply
Old Feb 2, 2010 | 09:58 PM
  #2  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

If you follow the lines coming from it, where do they go? LOL

Yes though it is the trans cooler. Where is it leaking from though?
 
Reply
Old Feb 2, 2010 | 10:48 PM
  #3  
Desert_Ram's Avatar
Desert_Ram
Thread Starter
|
Veteran
Joined: Dec 2009
Posts: 304
Likes: 0
From: The Styx,Arizona
Default

the top right corner no dings or nothing there been keeping my eye on it but only time i have seen it drip is once in a 2 hour period after driving it today there was a single drip on the ground not leaking to bad now but could become a problem down the road anybody every replaced this?
 
Reply
Old Feb 2, 2010 | 11:53 PM
  #4  
AF_HEMI's Avatar
AF_HEMI
Champion
Joined: Jan 2009
Posts: 3,411
Likes: 1
From: Minot AFB, ND in person, the 'burgh at heart
Default

for future reference, the biggest one is the engine radiator, the thin one in front of it is the trans cooler, and the one to the right of the radiator is for the A/C
 
Reply
Old Feb 3, 2010 | 07:39 AM
  #5  
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 23
From: South GA
Default

Well eventually you will have to replace it. But i think you already know that dont you. Years ago a shop could weld or braze them but not with the new plastic ones.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:39 AM.