i have a 2008 ram 1500 quad cab slt with a hemi.

i am looking for a 3" lift are there any out there. I dont want to go as crazy as i did in my 97 ram it was a 5.5" fabtec.

any help would be great.

thanks for reading

 

Why not just a Performance Accessories body lift for 3"

Or you can get some 3" spindles to raise the front.

 

ummm ya google has a ton also e-bay and everywhere else ..you have a computer right??

imo a body lift will do ya

 

i am not really into the body lift thing. and i have looked and all i could find was the rancho 3" just wondering if there is any more out there.

but thanks for the info it all helps

 

The good thing about a BL is that you wont mess with your suspension meaning you wont need a alignment and it will still keep the same comfortable ride. If you play with the suspension it will ride more rough

 

rancho isint a bad kit . i think tuff country makes one but i would go rancho

 

the rough ride is not a concern for me. I also have a dirt bike,atv and flat deck trailer i use with the truck what about an air ride in the rear with suspension lift

 

how hard is it to put a body lift on? if i just wanna do a 3in? how much? and do i need a leveling kit then put on the body lift or just put blocks in front and back. i dont wanna go more than three cause i dont like how you can see the undercarage with like a 6 in body lift or so.

 

Lots of us have done are own BL's. I did mine by myself. They cost about 350+. I have some brand new gap guards for sale if you want them.

You can do a BL and then spindles and blocks or the other way around. That part does not matter.

http://cid-fb87bd8396fbfbf4.skydrive...ch%20total%5E6

 

boo on the bl! it only rides ruff if you have 24s with AT tires and alot of suspension! Just messin weed! don't take it seriously. Go with a KORE or carlil I think. Kore is about 3" and gives a great ride. Oh just be ready to drop some coin on it!