i have a 2006 IFS 1500, i put the 6 inch fabtech basic system( spacer is on top) the truck nose dives a good 2 inches. I took it to my local off road shop and a leveling kit would not work bc of the spacer already there. I was wondering if anyone knows how i could level the truck without lowering the back.. Input greatly need! thanks

 

I know a lot of guys with the 6" fabtech kit, although it's far from my favorite kit, I don't know of a single guy reporting that issue. My guess is something isn't right with the install...

 

ive had it checked out at 3 different shops to see if they could tell me why it sits low and how i can pick it up, and have gotten no answers

 

What all came with your lift kit? Spindles? Springs? Spacers? Blocks? Shackles?

 

the basic fatech 6in. Lift... its got the strut spacer on top, blocks in the rearend. I dont remember what all it come with

 

See if you could get under your truck and snap some pictures, I'll be able to help you out a bit if I can see what you're working with. Just from reading I'm guessing they didn't install a component all-together, or you might have 5" blocks in back instead of 3"

 

hey, sorry for no photos i broke my camera and have to get a new one. But i was wondering, i was told i could use the rancho quick lift setup in place of my current strut/coil. Would this work?

 

You don't remember?

 

i never looked at it i gave the guy money to order a lift and said pick a good one

 

i never seen the kit, i gave the guy money to order me a good lift and he picked the fabtech. I always heard they were good so that was the one i got