3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Replacing Under Hood light bulb

Thread Tools
 
Search this Thread
 
Old Apr 30, 2005 | 10:57 AM
  #1  
mill500's Avatar
mill500
Thread Starter
|
Veteran
Joined: Nov 2004
Posts: 310
Likes: 0
From:
Default Replacing Under Hood light bulb

Kind of a dumb question, but my underhood light is out. Has anybody had to replace one of these bulbs? I was pulling around on it trying to figure out how it comes apart (there's nothing in the manual I could find on it). It looks like the only 2 possibilities are the plastic lens itself and the electrical connector, but niether seem to want to come apart and I don't want to start prying on the wrong part and break the thing (been there done that before).
 
Reply
Old May 1, 2005 | 01:26 AM
  #2  
Parts/Service's Avatar
Parts/Service
Champion
Joined: Mar 2004
Posts: 2,703
Likes: 2
From: Bremen, GA.
Default RE: Replacing Under Hood light bulb

REMOVAL
Disconnect and isolate the battery negative cable.
Insert a small flat blade in the access slot between the lamp base and lamp lens.
Pry the lamp lens upward and remove the lamp lens (Underhood Lamp Lens).
Depress the bulb terminal inward (Underhood Lamp Bulb) to rele
 
Reply




All times are GMT -4. The time now is 01:17 PM.