3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

nitrious on out hemis

Thread Tools
 
Search this Thread
 
Old Mar 24, 2010 | 12:14 AM
  #1  
moparmike01's Avatar
moparmike01
Thread Starter
|
Professional
Joined: Mar 2010
Posts: 241
Likes: 0
Default nitrious on out hemis

ok for nitrous let me get this straight. You need a purge kit well for safety i guess to clean the lines that something to buy. In addition you should have a window switch, bottle heater a gauge on the tank to see what the psi is at. You can get a remote opener which is nice i guess. blow down tube kit for the track. is that all?? i like to know other than that if i need anything on my truck i use a 50 shot at first test it then up 100.
 
Reply
Old Mar 24, 2010 | 12:18 AM
  #2  
moparmike01's Avatar
moparmike01
Thread Starter
|
Professional
Joined: Mar 2010
Posts: 241
Likes: 0
Default

also what is the proper or the best air fuel ration is it 13.0 or what for our trucks thanks
 
Reply
Old Mar 24, 2010 | 12:29 AM
  #3  
moparmike01's Avatar
moparmike01
Thread Starter
|
Professional
Joined: Mar 2010
Posts: 241
Likes: 0
Default

also the proper psi i hear now is between 850-950 psi. If someone can chime in that be nice thanks again
 
Reply
Old Mar 24, 2010 | 12:36 AM
  #4  
moparmike01's Avatar
moparmike01
Thread Starter
|
Professional
Joined: Mar 2010
Posts: 241
Likes: 0
Default

and now i hear A safe range is 900psi to 1100 psi. http://www.southsidestreetcars.org/s...ex.php?page=35
gosh i guess in morning i going to call nx and see what they say
 
Reply
Old Mar 24, 2010 | 12:53 AM
  #5  
Matt99's Avatar
Matt99
Champion
Joined: May 2008
Posts: 4,210
Likes: 0
From: Shreveport, LA
Default

dude look at the bottom of your post and theres a EDIT POST button, so you dont have to post 4 times, one after another

And you are getting pretty deep on all this, alot deeper than 99% of people on here. You might have to chill for a little while to wait on answers. Like in your other post, people can help you with some of the more common things but Nitrous is rare on these trucks. You might try the lx forums or something for that
 
Reply
Old Mar 24, 2010 | 01:39 AM
  #6  
Shiloh 24's Avatar
Shiloh 24
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

You might also try the guys over on DT. Guys over there are much more performance oriented than alot of guys here. Also you might pm I think it was horseapples who runs nitrous through his. He could prolly help you out quite a bit too.
 

Last edited by Shiloh 24; Mar 26, 2010 at 01:45 AM.
Reply
Old Mar 24, 2010 | 04:18 AM
  #7  
05RamMan's Avatar
05RamMan
Captain
Joined: Jun 2009
Posts: 575
Likes: 0
Default

dont get it, Why put nitrous on a pickup?
 
Reply
Old Mar 24, 2010 | 07:31 AM
  #8  
moparmike01's Avatar
moparmike01
Thread Starter
|
Professional
Joined: Mar 2010
Posts: 241
Likes: 0
Default

sorry about all the post forgot about the edit button? why not make it more fun
 
Reply
Old Mar 24, 2010 | 08:18 AM
  #9  
MOusafLRT03's Avatar
MOusafLRT03
Registered User
Joined: Mar 2010
Posts: 47
Likes: 0
From: Warrensburg, MO
Default

Originally Posted by 05RamMan
dont get it, Why put nitrous on a pickup?
why put nitrous on anything.... MO POWER!!!!



i personally wouldn't use it since it would be totally new territory for me, but other power adders, i'm all for it.

gl on OP.
 
Reply
Old Mar 24, 2010 | 08:20 AM
  #10  
Got_Hemi44's Avatar
Got_Hemi44
Record Breaker
Joined: Nov 2008
Posts: 1,751
Likes: 0
From: Dayton, Ohio
Default

Originally Posted by 05RamMan
dont get it, Why put nitrous on a pickup?
Same reason you put it on a car.
 
Reply



All times are GMT -4. The time now is 04:48 AM.