When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I just saw a ram today as a matter of fact with the ranch hand bumper and I was gonna look into it myself. It was really nice. I saw the sticker and hadn't heard of them before.
The ranch hands look kinda like farmer fab technology. Who uses Sched. 40 and diamond plate to do a bumper? Pass. Road armor and other sheet metal bumpers for the win.
thanks man , i used a 2" kit at first then scrapped that for a 3" kit springs in front blocks in back , along with new pitman arm , end links, and shocks .
i went from 2" to 3" because i wanted to clear 37's
My only problem is that I pull a 35' 5th wheel RV, so 3" of lift and 37" tires may be too much for me. After discussing this some guys here on the site I am thinking about 35" tires with a leveling kit or lifting shocks in the front and airbags in the rear....still researching and pricing but need to make a decision soon 'cause I am getting impatient
My only problem is that I pull a 35' 5th wheel RV, so 3" of lift and 37" tires may be too much for me. After discussing this some guys here on the site I am thinking about 35" tires with a leveling kit or lifting shocks in the front and airbags in the rear....still researching and pricing but need to make a decision soon 'cause I am getting impatient
You will be pretty happy with that setup. Especially with the bags out back.