my new dragster project
Record Breaker
Joined: Oct 2008
Posts: 1,158
Likes: 0
From: Edmonton Ab Canada
Lol no. Had a vortech running 11lbs and my meth musta quit and it must of detonated like son of a bitch and cracked one of the main webbings right to the top. She still ran but had a bad knock cause the block lost all of its tension and the cam bearings were completely outta place. Weird eh. So new stock block and new factory bottom end, main cap girdles, oil pump and pan, cleaned up the cam, and re worked the iron world product heads. Topped her off with a new alt and water pump, fuel pressure regulator, and eldelbrock street performer intake then powder coated and painted everything under hood black. She is all buttoned up now just need a tune but she runs and drives really nice. Thats only what we have done this year there are way more mods where that comes from.
Professional
Joined: Feb 2010
Posts: 190
Likes: 0
From: Copperas Cove, TX
Ok im back inside. So im "in the process" of buying a 89 mustang 5.0 with a lunati cam 512/512, shorty headers,.....rustmaster exhaust(ill fix that), bbk short shifter and clutch, msd ignition-wires-coils-etc, 3.73 w/posi, and cobra rims on kumho's. Oh dont forget the trailer 
i decided to get a project of my own since i get paid to go to school. On top of my classes being paid for i also bank 550 per class i sign up for.....i just signed up for 8(not doing all at once ofcourse)
i decided to get a project of my own since i get paid to go to school. On top of my classes being paid for i also bank 550 per class i sign up for.....i just signed up for 8(not doing all at once ofcourse)