Im looking at buying the stock srt10 oil temp gauge. anyone done this before? will it work? and what parts do i need to make it work? it just comes with the gauge and maybe 8" of the wires attached to the gauge. Also will an 04-05 pillar fit my 02?
thanks

 

anyone?

 

dont know about the gauge, but the pillar will fit.

 

And the guage can be used on that engine like adding one to any engine

 

Is the SRT10 gauge part of the SRT10 ICC? If so it probably won't work with our Ram ICC. There are plenty of stand alone temp gauges available. Also AI works great for reading many of the trucks sensors and it is plug and play.

 

It might not be completely plug and play (i.e. wires matching up) because the hemi and srt use different wiring harnesses. but yes, like weedahoe said, you can use any oil temp guage on any engine as long as you wire it properly.

 

is there a universal sender unit i could get to tap in to my oil pan or whatever to hook to this gauge. i like the look of the gauge alot just trying to figure out what else i need to make the gauge work. any install kit anyone can reccomend?