3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1,500 Mile trip and 90,000 Miles on my pickup???

Thread Tools
 
Search this Thread
 
Old Jun 23, 2010 | 04:01 PM
  #21  
rocket23's Avatar
rocket23
Champion
Joined: Feb 2010
Posts: 2,891
Likes: 1
From: connecticut
Default

A set of what?? And whats a swather?? It don't take much too ,lose me I'm afraid.lol
 
Reply
Old Jun 23, 2010 | 05:09 PM
  #22  
06 RMK 900's Avatar
06 RMK 900
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 86
Likes: 0
Default

This would be a swather close to what we have but it's used to cut hay/grain.


 
Reply
Old Jun 23, 2010 | 05:10 PM
  #23  
06 RMK 900's Avatar
06 RMK 900
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 86
Likes: 0
Default

And I bought a set of spark plug wires.
 
Reply
Old Jun 23, 2010 | 05:16 PM
  #24  
rocket23's Avatar
rocket23
Champion
Joined: Feb 2010
Posts: 2,891
Likes: 1
From: connecticut
Default

Right and you have coil packs? So you replaced the four little wires too each coil pack??
 
Reply
Old Jun 23, 2010 | 05:28 PM
  #25  
06 RMK 900's Avatar
06 RMK 900
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 86
Likes: 0
Default

Originally Posted by rocket23
Right and you have coil packs? So you replaced the four little wires too each coil pack??
No would be the 8 wires from the coil packs to the plugs. And i'm just going to keep my current coils until I know they are bad because a new set of coils are aroun $400.
 
Reply
Old Jun 23, 2010 | 05:48 PM
  #26  
rocket23's Avatar
rocket23
Champion
Joined: Feb 2010
Posts: 2,891
Likes: 1
From: connecticut
Default

All right i think i get it now. My set up is a little different. I have little wires that are attached to the coil packs which are located above the spark plugs bolted on too the valve cover.
 
Reply
Old Jun 23, 2010 | 05:58 PM
  #27  
06 RMK 900's Avatar
06 RMK 900
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 86
Likes: 0
Default

Originally Posted by rocket23
All right i think i get it now. My set up is a little different. I have little wires that are attached to the coil packs which are located above the spark plugs bolted on too the valve cover.
yup I think 05 was the last year they have the spark plug wires then after that they went to your setup.
 
Reply
Old Jun 23, 2010 | 06:01 PM
  #28  
rocket23's Avatar
rocket23
Champion
Joined: Feb 2010
Posts: 2,891
Likes: 1
From: connecticut
Default

I saw your sig and assumed you had an o6.my bad.Incidently 'weedahoe" another member actually switched to my set up. That a great mod imo.
 
Reply
Old Jun 23, 2010 | 06:12 PM
  #29  
06 RMK 900's Avatar
06 RMK 900
Thread Starter
|
Rookie
Joined: Jun 2009
Posts: 86
Likes: 0
Default

Originally Posted by rocket23
I saw your sig and assumed you had an o6.my bad.Incidently 'weedahoe" another member actually switched to my set up. That a great mod imo.
Yeah I seen that thread and thought about doing it but with all the stuff I bought the other day and I also ordered a Aeroforce gauage I think I have enough stuck into the truck for now lol.
 
Reply
Old Jun 23, 2010 | 06:27 PM
  #30  
rocket23's Avatar
rocket23
Champion
Joined: Feb 2010
Posts: 2,891
Likes: 1
From: connecticut
Default

Cool that guage set up for the driver side Grip handle support?
 
Reply



All times are GMT -4. The time now is 01:16 PM.