I have an 2007 dodge ram v6 3.7L
I was looking for a tuner and i found a hypertech on Moes Performance

tell me if im looking at the rite thing


Fits:

• 2003-2009 Dodge Ram 5.7L HEMI
• 2006-2009 Dodge Ram 4.7L
• 2006-2009 Dodge Ram 3.7L
• AND MORE!

Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire rpm band. In addition, Hypertech’s exclusive Transmission/Converter Programs in every power programmer to further increase fuel mileage by lowering automatic transmission shift points and locking the torque converter at lower speeds to average less...

• engine revs
• intake strokes
• friction and pumping losses
• fuel wasting torque converter slippage.

With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.Max Energy...The Best Hand held Performance Tuner On The Market!

 

would it even be worth it to put a tuner on a 3.7 v-6?

 

Saw your post and thought I would let you know what coverage we do and do not have for your vehicle.

2007 Ram 1500 3.7L gas coverage :

Part Number 752001 Speedometer Calibrator ONLY ***No Tuning options currently available
Adjustable Features
Speedometer\Odometer Correction For Gears 2.82, 3.07, 3.21, 3.42, 3.55, 3.73, 3.92, 4.10, 4.56, 4.88 & 5.13
Speedometer\Odometer Correction For Tire Sizes 22.5 - 44 inches 1/4 inch increments
DTCs Read and Clear
Return Back To Stock
Internet Updateable

GW
Hypertech Inc.

 

I think that solves that one...

Maybe headers will do more than a tuner for ya? i know there was a member on here that installed headers on his v6 recently but I heard no thoughts on how it has performed.
Just stay away from Jetchip or any non-handheld tuners.

 

I would like to thank Hypertech Support for coming out and saying what they do support even though it is not much at all.

But I have to be honest and say what they do support is not appealing for likely what their cost is. I would look into a CAI and some headers if they make them for a v6.

 

thanks guys, I wasnt sure if that would work or not........... I just would like some more power in that little engine

 

DCX XCalibrator 2 Handheld Programmer

 

I have an Intake on my DerrikSmash had headers on his...they are shorties though, I can't quite remember what he had to say about them. I've looked into them, not sure if its worth it yet.