3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

tire help and size

Thread Tools
 
Search this Thread
 
Old Jul 18, 2010 | 12:51 PM
  #1  
andrewram2's Avatar
andrewram2
Thread Starter
|
Registered User
Joined: Mar 2010
Posts: 14
Likes: 0
From: ohio
Default tire help and size

i have a guy with a set of 35/12.50 17 kuhmo mt's that wants to trade me for my 33's. how do the kuhmo's drive down the road and most importantly can i stuff them under my truck. i have a 2" leveling kit and it looks like theres plenty of room but wanted to find out from someone first hand. thanks guys
 
Reply
Old Jul 18, 2010 | 12:59 PM
  #2  
rocket23's Avatar
rocket23
Champion
Joined: Feb 2010
Posts: 2,891
Likes: 1
From: connecticut
Default

Well it has been posted that these are quite good as tires go. You might get a slight rub. Some guys lived with it ,others took a dye grinder too the part that rubbed. It was'nt much of a rub.
 
Reply
Old Jul 18, 2010 | 10:36 PM
  #3  
sbsga's Avatar
sbsga
Professional
Joined: Mar 2010
Posts: 228
Likes: 0
From: Savannah
Default

I have the Khumo a/t in a 325/65r20 which equals 35.35x12.79, Im running more lift but you could run them too. you will get a little rub if you crank the wheel all the way over though. I dont know about the m/t but my a/t's are a nice ride, not much noise, so far at almost 10,000 miles im pretty impressed by them being so well rounded. I have a friend who had the m/t's on his truck and they seemed to do really well in the georgia clay.
 
Reply




All times are GMT -4. The time now is 04:37 AM.