5.7 Hemi conversion questions
#1
#4
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
The engine block should be the same. Make sure your torque converter is recessed into the tranny bell housing... ( I made this mistake and went through the same thing) should be about 1/2 inch past the edge of the tranny housing... the torque converter is keyed, so make sure you look and line it up and turn it until it slides in all the way... Then lightly tighten tranny down, tighten the torque converter up to the flexplate, then torque your tranny to the block.
Last edited by VLSGunner1; 07-29-2010 at 09:15 PM.