3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Can you fit a 37" Tire on a 2wd with a level and 4" spindle lift?

Thread Tools
 
Search this Thread
 
Old Aug 4, 2010 | 03:48 PM
  #1  
CardinalsFan11's Avatar
CardinalsFan11
Thread Starter
|
Professional
Joined: May 2010
Posts: 180
Likes: 0
From: Kalamazoo, Michigan
Default Can you fit a 37" Tire on a 2wd with a level and 4" spindle lift?

Alright. I've got a 2wd 1500. It's got a 2" Leveling kit, and have a 4" Spindle Lift on the front. As well as a 2" Rear Block. Could I fit a 37" Tire?

one more thing too (a noob question..) The 37" tire I am looking at is 13.5 wide instead of 12.5 that I have now. Will that make any difference as to whether it will fit? Does that extra inch really not affect anything else?

Thanks in advance..
 
Reply
Old Aug 4, 2010 | 07:30 PM
  #2  
CardinalsFan11's Avatar
CardinalsFan11
Thread Starter
|
Professional
Joined: May 2010
Posts: 180
Likes: 0
From: Kalamazoo, Michigan
Default

so....
 
Reply
Old Aug 4, 2010 | 09:01 PM
  #3  
Freakinkeith806's Avatar
Freakinkeith806
All Star
Joined: Jul 2008
Posts: 776
Likes: 0
From: Amarillo, TX
Default

I would think so, I know 35's will fit with the level, you would hope 37's would with 6 inches of total lift. Now for the 13.5 tire I wonder if wheel spacers would need to come into play?
 
Reply
Old Aug 4, 2010 | 09:06 PM
  #4  
CardinalsFan11's Avatar
CardinalsFan11
Thread Starter
|
Professional
Joined: May 2010
Posts: 180
Likes: 0
From: Kalamazoo, Michigan
Default

after thinking about it I think I am going to go with the 37x12.50x18 Nitto Dune Grapplers instead of the 13.50 Mud Grapplers. Anyway some more input about the 37's fitting with a 2" level and 4" spindle in the front and a 2" rear block in the back would be great
 
Reply




All times are GMT -4. The time now is 01:08 AM.