3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Power Locks problem

Old Nov 27, 2010 | 10:12 AM
  #1  
luckydt's Avatar
luckydt
Thread Starter
|
Veteran
Joined: Feb 2010
Posts: 294
Likes: 0
From: NC
Question Power Locks problem

I have had this issue for some time now and trying to problem solve. When in the truck if i hit the master power lock button on the driver side it will lock only the left side doors. If i go to the passenger side lock button and hit it up to unlock you hear the left side selenoids, but nothing happens. If you hit the passenger lock down nothing happens. Now if i have either passenger door open for more than about 10 seconds the driver side door will lock. This can be a problem if the truck is running and you load something in the passenger side as now you have truck running with the doors locked. I have replaced the lock switch on the passenger side with no luck. So is there something that tells the computer when the door is adjar?

Thanks for the help guys/girls
 

Last edited by luckydt; Nov 27, 2010 at 10:18 AM.
Reply
Old Nov 27, 2010 | 01:09 PM
  #2  
NYPANAMA42's Avatar
NYPANAMA42
Record Breaker
Joined: Aug 2006
Posts: 1,025
Likes: 1
From:
Default

Hey thats a nice color truck....Did you purchase it like that, or did you have a after market paint job done?
 
Reply
Old Nov 27, 2010 | 06:25 PM
  #3  
luckydt's Avatar
luckydt
Thread Starter
|
Veteran
Joined: Feb 2010
Posts: 294
Likes: 0
From: NC
Default

Originally Posted by NYPANAMA42
Hey thats a nice color truck....Did you purchase it like that, or did you have a after market paint job done?

It's the factory patriot blue, but the whole truck has been wet sanded and polished to a glass finish so i changes the color a little.

Does anyone know if there are relays that run each side of the power locks?
 
Reply
Old Nov 28, 2010 | 10:54 PM
  #4  
luckydt's Avatar
luckydt
Thread Starter
|
Veteran
Joined: Feb 2010
Posts: 294
Likes: 0
From: NC
Default

bump

side note i tried to unlock the truck using the key in the drivers door and the alarm went off had to use the key fob to disarm.
 

Last edited by luckydt; Nov 28, 2010 at 10:57 PM.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:14 PM.