3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

throwin codes

Thread Tools
 
Search this Thread
 
Old Dec 18, 2010 | 04:46 PM
  #1  
blue07sport's Avatar
blue07sport
Thread Starter
|
Amateur
Joined: Jun 2009
Posts: 28
Likes: 0
From: Southern Maine
Default throwin codes

I have an 07 ram 1500 with 48400mi. flomaster 40 with 3 in pipe cat back, K&N CAI, and Diablo Predator. i was driving today and as i left the toll booth i got a check engin light, checked it and its giving me p1404 and p0405 which both seem to have to do with the EGR. on the drive home it seemed fine on the highway. i was having a surging problem at low rpms which seems to be worse now than before the light came on

My question is: would this cause problems if i cant fix it right away? i have to work at least tomorrow before i can get it into the shop or even have time to work on it myself. i have a 60 mile round trip commute.

Any help would be appreciated!
 
Reply
Old Dec 18, 2010 | 07:22 PM
  #2  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

Yeah your EGR is shot, usually occurs somewhere between 40-50k miles. It'll run a bit rough at idle and low rpms, get worse fuel economy but you can get by.

I'd really consider picking one up and swapping it out yourself. Cost at an auto parts store is like $35 where dealerships charge about $75. It's also about a 10 minute swap which only requires a basic socket set to get the two bolts holding it on. Most dealerships will nail you $90+ on the labor...
 
Reply
Old Dec 18, 2010 | 08:19 PM
  #3  
blue07sport's Avatar
blue07sport
Thread Starter
|
Amateur
Joined: Jun 2009
Posts: 28
Likes: 0
From: Southern Maine
Default

awesome thanks alot! i just need to get by till i can go to carquest or something tomorrow
 
Reply




All times are GMT -4. The time now is 07:47 AM.