3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

3.7-No start

Thread Tools
 
Search this Thread
 
Old Dec 24, 2010 | 03:32 PM
  #1  
bevoe's Avatar
bevoe
Thread Starter
|
Amateur
Joined: Dec 2010
Posts: 37
Likes: 0
From: Louisiana
Default 3.7-No start

I have a 2003 1500 with a 3.7. I just put a rebuilt engine in it, and now having starting problems. When we first put it in and hooked it all up, (except rad,) it fired up the first time and ran for about ten seconds. We then shut it down to finish hooking everything else up. Now, it just turns over. No poping , banging or anything. Anyone has any idea, that can help. I sure woud appreciate it.
 
Reply
Old Dec 24, 2010 | 04:53 PM
  #2  
CardinalsFan11's Avatar
CardinalsFan11
Professional
Joined: May 2010
Posts: 180
Likes: 0
From: Kalamazoo, Michigan
Default

when you rebuild an engine a lot can go wrong..

is the battery properly connected? a loose wire could explain this
 
Reply




All times are GMT -4. The time now is 09:06 AM.