3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

new member 1st thread

Thread Tools
 
Search this Thread
 
Old Jan 17, 2011 | 08:26 PM
  #1  
jimheh's Avatar
jimheh
Thread Starter
|
Registered User
Joined: Jan 2011
Posts: 4
Likes: 0
From: New Berlin,WI
Default new member 1st thread

I have a 2004 1500 Ram 5.7L Hemi w/ 57000 miles on it. The check engine light just came on and my code reader gives a P 406 code. Egr valve problem. The factory service manual doesn't show an egr valve in the index much less where it is on this engine. Any help with this would be appreciated.
 
Reply
Old Jan 18, 2011 | 07:45 AM
  #2  
1969CoronetR/T's Avatar
1969CoronetR/T
vaffanculo
Joined: Oct 2008
Posts: 7,954
Likes: 2
From: Pittsburgh, PA
Default

Welcome to the site. I will move this thread to the thirdd generation Ram section,
FF
 
Reply
Old Jan 18, 2011 | 08:36 AM
  #3  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

It's an easy replacement and usually one usually lasts from about 40,000 miles to 60,000 depending on factors like driving conditions, etc.

Dealers usually charge about $75 for the part and $90 for the install, but you can get one at an auto parts store for about $35 and change it yourself in about 10-15 minutes with just a standard socket set.

Be thankful you have a Hemi, it's right up front and easy to get to as opposed to the 4.7 where it's against the fire wall and can be a bi*ch to reach.

https://dodgeforum.com/forum/3rd-gen...egr-valve.html
 
Reply




All times are GMT -4. The time now is 04:38 PM.