3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Front Diff Ident

Thread Tools
 
Search this Thread
 
Old Jan 31, 2011 | 10:14 PM
  #1  
slimvela's Avatar
slimvela
Thread Starter
|
Professional
Joined: Aug 2010
Posts: 208
Likes: 0
From: PHX AZ
Default Front Diff Ident

Is it the 'Corporate 8.75, 10 Bolt' that is on the 2002+ 1500 4x4?

Reason I ask is I am looking for a cover with easier access for servicing i.e. drain/fill.
 
Reply
Old Jan 31, 2011 | 11:50 PM
  #2  
Marx's Avatar
Marx
Record Breaker
Joined: Dec 2009
Posts: 1,262
Likes: 1
From: Ontario Canada
Default

you could always drill and weld a nut to the out side and use a screw to make a drain
or just get a liquid pump
 
Reply
Old Feb 1, 2011 | 10:54 PM
  #3  
slimvela's Avatar
slimvela
Thread Starter
|
Professional
Joined: Aug 2010
Posts: 208
Likes: 0
From: PHX AZ
Default

Originally Posted by Marx
you could always drill and weld a nut to the out side and use a screw to make a drain
or just get a liquid pump
I thought about doing that exact thing on this truck same as my previous 3 rides. But, the covers/pans I recently found have magnetic drain plug, fill plug, increased capacity and fluid level check 'window'. Pretty nice to have these 'goodies' as well.

Already getting the increased capacity pan/cover for the trans and rear diff, but it's the front that is in question at this point.


As far as the liquid pump goes...ugh, this 'ol man has grown weary of that option...ha ha


Hmmm...
 
Reply




All times are GMT -4. The time now is 04:15 AM.