Radiator Air Lock - I'm stumped!
#11
So I was thinkin this issue over last night, couldn't get it out of my head. Then it hit me, I had the same problem on a V8 Ranger project years back. I miss that truck, mustang eater it was... ;-)
Water pump vanes had slipped loose from the shaft. They would only move/spin as rpm increased. Think plastic fan blades spinning freely on motor shaft. No leaks whatsoever but no flow either.
Water pump vanes had slipped loose from the shaft. They would only move/spin as rpm increased. Think plastic fan blades spinning freely on motor shaft. No leaks whatsoever but no flow either.
Last edited by slimvela; 03-16-2011 at 05:42 PM.
#13