Bed removal
All Star
Joined: Aug 2009
Posts: 762
Likes: 0
From: Lloydminster Alberta Canada
who said you would be wasting go juice, i would assume you would put the gas in a clean pail lol. Lowering a tank isn't that hard either, a good floor jack and some 2x4 will do the trick nicely, and you don't need three of your friends there to take half the truck off. I prefer to test the pump in the pail of siphoned fuel prior to installing in the tank as well.
Registered User
Joined: Nov 2020
Posts: 2
Likes: 0
For an s10 can a rambox
ok iv been ther and don that no more than a month ago... take the bed off its a hundred times easier but i had 2 other people helping me. the bed is only held on by 6 bolts, 2 bolts by the cab and 4 by the bumper. 1 person at the tailgate and 2 people at either side of the box at the cab and lift. plus if u take the box off u can change the pump and still test the pump to make sure the truk runs rather than fight the tank bak into place only to find that a cable came undone
Administrator
Joined: Apr 2010
Posts: 87,387
Likes: 4,211
From: Clayton MI
Depends on how creative you are. LOTS of fab work involved, and I would bet real money the box is wider than your truck.
